AMC Evolution AMC Eagle Forums
http://forums.amcevolution.com/

trailer hitch measurements
http://forums.amcevolution.com/viewtopic.php?f=30&t=1910
Page 1 of 1

Author:  maddog [ Thu Feb 27, 2014 5:55 pm ]
Post subject:  trailer hitch measurements

since I was off today I decided to measure the hitch I have sitting on the floor of my garage so that you guys who want one can get one made for your Eagle. now I know it will fit the big bodied Eagles but i'm not sure if it will fit the smaller bodied SX/4's and Kammback's seeing as I got it off a 85 or 84 wagon and I don't have an SX/4 or Kammback to test it on. here are the measurements along with a few pictures of what it looks like.
the back piece is a 1/4 of an inch thick with a length of 39 1/4 by 4 1/4 at the ends and 7 1/4 in the middle with a 90* bend 2 1/8 inches from the top.
the front piece is a 1/4 of an inch thick with a length of 8 1/2 by 7 inches with a 90* bend 1 1/8 inches from the top and a 90* bend at 4 1/2 inches from the bottom.
the tube is a 1/4 of an inch thick with a length of 6 3/8 and a inside width and height of 2 inches and an outside width and height of 2 1/2 inches.
the collar that goes around the end of the tube is a 1/4 of an inch thick with a length of 1 inch and a inside width and height of 2 1/2 inches and an outside width and height of 3 inches.

Image
Image
Image
Image

Author:  Prafeston [ Thu Feb 27, 2014 5:56 pm ]
Post subject:  Re: trailer hitch measurements

THUMPS UP!!!!

Author:  Prafeston [ Thu Feb 27, 2014 5:56 pm ]
Post subject:  Re: trailer hitch measurements

Oh dang, wrong forum! haha

Author:  maddog [ Thu Feb 27, 2014 5:59 pm ]
Post subject:  Re: trailer hitch measurements

thanks dude.
Prafeston wrote:
Oh dang, wrong forum! haha

:lmao: :lmao: i'll say.

Page 1 of 1 All times are UTC - 8 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/