AMC Evolution AMC Eagle Forums
http://forums.amcevolution.com/

WArning for those working on re-enabling the feedback carb
http://forums.amcevolution.com/viewtopic.php?f=15&t=2065
Page 1 of 1

Author:  1985amceagle [ Thu Feb 05, 2015 2:00 pm ]
Post subject:  WArning for those working on re-enabling the feedback carb

Id recommend checking the resistance of the solenoid pack that bolts to the valve cover. the service information lists that you should have around 50 ohms of resistance. if it is lower than that, you will fry your computer when the PCM tries to ground the solenoid to turn them on. I at least have a clue why the original one was faulty and couldn't decide where it wanted the fuel mixture to be set to, and thankfully SD isn't a emissions state. (yet)

Page 1 of 1 All times are UTC - 8 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/