AMC Evolution AMC Eagle Forums
http://forums.amcevolution.com/

Kammy
http://forums.amcevolution.com/viewtopic.php?f=13&t=1268
Page 8 of 10

Author:  zachlikebeer [ Tue Dec 03, 2013 9:07 pm ]
Post subject:  Re: Kammy

cool, no more bricks for parking brake. Thanks, I need to get some time to help you work and strip the eagles.

Author:  SpreadEagle [ Fri Dec 13, 2013 3:32 pm ]
Post subject:  Re: Kammy

Hoping to get some work done tomorrow. Get the bad brake cable removed, probably change the front left shaft especially since it's up on stands now.

Author:  thereverendbill [ Fri Dec 13, 2013 7:49 pm ]
Post subject:  Re: Kammy

a very good idea is to remove the fuel tank and hose the underside of the trunk floor with bedliner or shit ton of ruberized undercoating cause that's a fun place for moisture and dirt to acumulate and start rusting

Author:  carnuck [ Sat Dec 14, 2013 9:38 am ]
Post subject:  Re: Kammy

Just an FYI, but changing the front axle while on wheelstands is okay, but it's much harder on axle stands. :blah: Just sayin'

Author:  SpreadEagle [ Mon Jan 13, 2014 1:06 pm ]
Post subject:  Re: Kammy

Was not swapping the axle currently. Just the CV's.
I also am in the process of looking at a T-5 from an 83 Eagle listed on Car-part.com. Recycler says they have it shipped for about 350 total.. they are going to drop the pan and check it and let me know if it has shifter and such..

Doesn't sound bad for $350 if it was removed good and working..Especially if it has a shifter..

Author:  Prafeston [ Mon Jan 13, 2014 1:23 pm ]
Post subject:  Re: Kammy

Cool! Any other progress on Kammy? How is the welding patches in going? Get the rest of your Cherokee parted out?

Author:  SpreadEagle [ Mon Jan 13, 2014 2:27 pm ]
Post subject:  Re: Kammy

Prafeston wrote:
Cool! Any other progress on Kammy? How is the welding patches in going? Get the rest of your Cherokee parted out?

Been dead in the water lately. Bought some basic tools I've been needing though.
Jack stands, Jack along wityh a breaker bar and Torque wrench..Hoping Wednesday to get the drive shafts dropped, tCase removed, and the seats out.
Cherokee still sits there waiting on a trip to get stripped.
Thought I had a trade waiting to get me a NP242 but not likely now.
Really trying not to spend money on anything not needed to get her running and in the dry.

Author:  Prafeston [ Mon Jan 13, 2014 2:54 pm ]
Post subject:  Re: Kammy

SpreadEagle wrote:
Really trying not to spend money on anything not needed to get her running and in the dry.

Good idea! Penny is supposed to be on the way to the exhaust shop tomorrow. I hope it will be finished by the end of the month!

Author:  SpreadEagle [ Mon Jan 13, 2014 3:09 pm ]
Post subject:  Re: Kammy

Just saw captspillane post on HHaase's Rally project and looked at an AX15. Locally there is 1 for $400. Being I have a 231 in my possession may be an easy swap. Wish I could trade out my AW4 for an AX15..

Author:  dleberfinger [ Mon Jan 13, 2014 6:16 pm ]
Post subject:  Re: Kammy

SpreadEagle wrote:
Just saw captspillane post on HHaase's Rally project and looked at an AX15. Locally there is 1 for $400. Being I have a 231 in my possession may be an easy swap. Wish I could trade out my AW4 for an AX15..


You should really look for a better deal on the trans. I got mine for $300 and that included everything from the pedal set down to the transfer case, plus the flywheel, clutch, and pressure plate.

Page 8 of 10 All times are UTC - 8 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/